Targeting In-Stent-Stenosis with RGD- and CXCL1-Coated Mini-Stents in Mice.

Atherosclerotic lesions that critically narrow the artery can necessitate an angioplasty and stent implantation. Long-term therapeutic effects, however, are limited by excessive arterial remodeling. We here employed a miniaturized nitinol-stent coated with star-shaped polyethylenglycole (star-PEG), and evaluated its bio-functionalization with RGD and CXCL1 for improving in-stent stenosis after implantation into carotid arteries of mice. Nitinol foils or stents (bare metal) were coated with star-PEG, and bio-functionalized with RGD, or RGD/CXCL1. Cell adhesion to star-PEG-coated nitinol foils was unaltered or reduced, whereas bio-functionalization with RGD but foremost RGD/CXCL1 increased adhesion of early angiogenic outgrowth cells (EOCs) and endothelial cells but not smooth muscle cells when compared with bare metal foils. Stimulation of cells with RGD/CXCL1 furthermore increased the proliferation of EOCs. In vivo, bio-functionalization with RGD/CXCL1 significantly reduced neointima formation and thrombus formation, and increased re-endothelialization in apoE-/- carotid arteries compared with bare-metal nitinol stents, star-PEG-coated stents, and stents bio-functionalized with RGD only. Bio-functionalization of star-PEG-coated nitinol-stents with RGD/CXCL1 reduced in-stent neointima formation. By supporting the adhesion and proliferation of endothelial progenitor cells, RGD/CXCL1 coating of stents may help to accelerate endothelial repair after stent implantation, and thus may harbor the potential to limit the complication of in-stent restenosis in clinical approaches.

The RGD coupling strategy determines the inflammatory response of human primary macrophages in vitro and angiogenesis in vivo.

Surface modifications of implants are frequently done using bioactive peptides. However, immune cells such as macrophages might evoke a rejection of an implant due to an undesired activation by the materials. Here, the influence of different strategies for peptide immobilization onto (poly)-vinylidene fluoride (PVDF) on inflammation and angiogenesis is studied. The inflammatory response of human primary macrophages is investigated by analyzing inflammatory cytokine expression. Surface roughness and adsorptive coupling have only minor effects on macrophage activation. Acrylic acid (AAc)-based covalent RGD-coupling leads to the most favorable cellular reaction, indicated by increased VEGF release. Chemical vapor deposition treated surfaces are inert, but additional covalent coupling of RGD induces a pronounced proinflammatory reaction. An in vivo angiogenesis study reveals that covalent coupling of RGD results in delayed but increased angiogenesis. It is concluded that for implant decoration with peptides, the substrate material has to be selected carefully to prevent inflammatory immune responses.

Ovine carotid artery-derived cells as an optimized supportive cell layer in 2-D capillary network assays.

BACKGROUND: Endothelial cell co-culture assays are differentiation assays which simulate the formation of capillary-like tubules with the aid of a supportive cell layer. Different cell types have been employed as a supportive cell layer, including human pulmonary artery smooth muscle cells (PASMCs) and human mammary fibroblasts. However, these sources of human tissue-derived cells are limited, and more readily accessible human or animal tissue-derived cell sources would simplify the endothelial cell co-culture assay. In the present study, we investigated the potential use of alternative, accessible supportive cells for endothelial cell co-culture assay, including human umbilical cord and ovine carotid artery. METHODS AND RESULTS: Human umbilical artery SMCs (HUASMCs) and ovine carotid artery-derived cells were seeded into 96-well plates, followed by addition of human umbilical vein endothelial cells (HUVECs). Nine days after co-culture, cells were fixed, immunostained and analysed using an in vitro angiogenesis quantification tool. Capillary-like structures were detected on ovine carotid artery-derived supportive cell layers. The initial cell number, as well as pro- and anti-angiogenic factors (VEGF, PDGF-BB and Bevacizumab), had a positive or negative influence on the number of capillary-like structures. Furthermore, HUVECs from different donors showed distinct levels of VEGF receptor-2, which correlated with the amount of capillary-like structures. In the case of HUASMC supportive cell layers, HUVECs detached almost completely from the surface. CONCLUSIONS: Cells of different origin have a varying applicability regarding the endothelial cell co-culture assay: under the conditions described here, ovine carotid artery-derived cells seem to be more suitable than HUASMCs for an endothelial co-culture assay. Furthermore, the ovine carotid artery-derived cells are easier to obtain and are in more abundant supply than the currently used dermal or breast tissue cells. The use of ovine carotid artery-derived cells simplifies the endothelial co-culture assay with respect to testing large amounts of pro- and anti-angiogenic factors.

Controlled intramyocardial release of engineered chemokines by biodegradable hydrogels as a treatment approach of myocardial infarction.

Myocardial infarction (MI) induces a complex inflammatory immune response, followed by the remodelling of the heart muscle and scar formation. The rapid regeneration of the blood vessel network system by the attraction of hematopoietic stem cells is beneficial for heart function. Despite the important role of chemokines in these processes, their use in clinical practice has so far been limited by their limited availability over a long time-span in vivo. Here, a method is presented to increase physiological availability of chemokines at the site of injury over a defined time-span and simultaneously control their release using biodegradable hydrogels. Two different biodegradable hydrogels were implemented, a fast degradable hydrogel (FDH) for delivering Met-CCL5 over 24 hrs and a slow degradable hydrogel (SDH) for a gradual release of protease-resistant CXCL12 (S4V) over 4 weeks. We demonstrate that the time-controlled release using Met-CCL5-FDH and CXCL12 (S4V)-SDH suppressed initial neutrophil infiltration, promoted neovascularization and reduced apoptosis in the infarcted myocardium. Thus, we were able to significantly preserve the cardiac function after MI. This study demonstrates that time-controlled, biopolymer-mediated delivery of chemokines represents a novel and feasible strategy to support the endogenous reparatory mechanisms after MI and may compliment cell-based therapies.

Biofunctionalized microfiber-assisted formation of intrinsic three-dimensional capillary-like structures.

OBJECTIVES: A vascular supply network is essential in engineered tissues >100-200-µm thickness. To control vascular network formation in vitro, we hypothesize that capillarization can be achieved locally by using fibers to position and guide vessel-forming endothelial cells within a three-dimensional (3D) matrix. MATERIALS AND METHODS: Biofunctionalization of poly-(L-lactic acid) (PLLA) fibers was performed by amino-functionalization and covalent binding of RGD peptides. Human foreskin fibroblasts (HFFs) and human umbilical vein endothelial cells (HUVECs) were seeded on the fibers in a mould and subsequently embedded in fibrin gel. After 9-21 days of coculture, constructs were fixed and immunostained (PECAM-1). Capillary-like structures with lumen in the 3D fibrin matrix were verified and quantified using two-photon microscopy and image analysis software. RESULTS: Capillary-like networks with lumen formed adjacent to the PLLA fibers. Increased cell numbers were observed to attach to RGD-functionalized fibers, resulting in enhanced formation of capillary-like structures. Cocultivation of HFFs sufficiently supported HUVECs in the formation of capillary-like structures, which persisted for at least 21 days of coculture. CONCLUSIONS: The guidance of vessel growth within tissue-engineered constructs can be achieved using biofunctionalized PLLA microfibers. Further methods are warranted to perform specified spatial positioning of fibers within 3D formative scaffolds to enhance the applicability of the concept.

Dexamethasone released from cochlear implant coatings combined with a protein repellent hydrogel layer inhibits fibroblast proliferation.

The insertion of cochlear implants into the inner ear often causes inflammation and fibrosis inside the scala tympani and thus growth of fibrous tissue on the implant surface. This deposition leads to the loss of function in both electrical and laser-based implants. The design of this study was to realize fibroblast growth inhibition by dexamethasone (Dex) released from the base material of the implant [polydimethylsiloxane (PDMS)]. To prevent cell and protein adhesion, the PDMS was coated with a hydrogel layer [star-shaped polyethylene glycol prepolymer (sPEG)]. Drug release rates were studied over 3 months, and surface characterization was performed. It was observed that the hydrogel slightly smoothened the surface roughened by the Dex crystals. The hydrogel coating reduced and prolonged the release of the drug over several months. Unmodified, sPEG-coated, Dex-loaded, and Dex/sPEG-equipped PDMS filaments were cocultivated in vitro with fluorescent fibroblasts, analyzed by fluorescent microscopy, and quantified by cell counting. Compared to the unmodified PDMS, cell growth on all modified filaments was averagely 95% ±standard deviation (SD) less, while cell growth on the bottom of the culture dishes containing Dex-loaded filaments was reduced by 70% ±SD. Both, Dex and sPEG prevented direct cell growth on the filament surfaces, while drug delivery was maintained for the duration of several months.

The role of SNAP-tag in technical approaches.

Biosensors are used for a variety of applications in medicine and biology. A critical step during the development of such devices is the coordination of biological and technical requirements. The design of the device, as well as of the sample chamber and its functionalized surface is of great importance. Depending on the surface, the method of coupling of the desired receptor has to be adapted to guarantee functionality and biological activity during the measuring process. By using the SNAP-tag technology, a site-specific coupling of molecules with unaltered activity to a variety of O(6)-benzylguanine functionalized surfaces is possible, making it a versatile tool for the setup of biomedical devices.

Surface-modified silicone foils for intraocular implantation.

BACKGROUND: Implantation of silicone materials like iris diaphragms into the eye can be complicated by cell migration and attachment. We studied polydimethylsiloxane (PDMS) foils coated with isocyanate terminated, star-shaped poly(ethylene glycol-stat-propylene glycol) (NCO-sP(EO-stat-PO)) equipped with heparin towards the inhibition of cell attachment without influencing cell viability. METHODS: Mouse fibroblasts L929 were cultured and seeded onto sterilized pieces of either uncoated NCO-sP(EO-stat-PO) or heparin-NCO-sP(EO-stat-PO) loaded foils. Polyvinylchloride (PVC) foils served as the positive control and biomembranes as the negative control. The cultured cells were examined after 24 h for cell viability and adhesion by fluorescence microscopy; morphological cell changes were documented after hemalaun staining. Cell density was measured and quantification of cell proliferation was assessed by a BrdU test; quantification of cell activity was analyzed by a WST-1 test. RESULTS: The fibroblasts' cell viability was excellent on all tested foils except the toxic PVC foil. NCO-sP(EO-stat-PO) coating provided significantly reduced cell activity. On heparin-loaded coatings, cells were viable and less dense but showed almost the same cell proliferation and cell activity as on the negative control. NCO-sP(EO-stat-PO) coated, heparin loaded foils proved high biocompatibility and reduced cell adhesion. CONCLUSIONS: Both NCO-sP(EO-stat-PO)-coated foils with and without heparin seemed to be a viable implantation material for less cell migration, attachment, and reduced implant complications. Conclusive we give a recommendation for further studies on the intraocular implantation in particular for the NCO-sP(EO-stat-PO)-coated foils.

Neutrophil-derived cathelicidin protects from neointimal hyperplasia.

Percutaneous transluminal angioplasty with stent implantation is used to dilate arteries narrowed by atherosclerotic plaques and to revascularize coronary arteries occluded by atherothrombosis in myocardial infarction. Commonly applied drug-eluting stents release antiproliferative or anti-inflammatory agents to reduce the incidence of in-stent stenosis. However, these stents may still lead to in-stent stenosis; they also show increased rates of late stent thrombosis, an obstacle to optimal revascularization possibly related to endothelial recovery. Here, we examined the contribution of neutrophils and neutrophilic granule proteins to arterial healing after injury. We found that neutrophil-borne cathelicidin (mouse CRAMP, human LL-37) promoted reendothelization and thereby limited neointima formation after stent implantation. We then translated these findings to an animal model using a neutrophil-instructing, biofunctionalized, miniaturized Nitinol stent coated with LL-37. This stent reduced in-stent stenosis in a mouse model of atherosclerosis, suggesting that LL-37 may promote vascular healing after interventional therapy.

Directed covalent immobilization of fluorescently labeled cytokines.

Cytokines are important mediators coordinating inflammation and wound healing in response to tissue damage and infection. Therefore, immobilization of cytokines on the surface of biomaterials is a promising approach to improve biocompatibility. Soluble cytokines signal through receptors on the cell surface leading to cell differentiation, proliferation, or other effector functions. Random immobilization of cytokines on surfaces will result in a large fraction of inactive protein due to impaired cytokine--receptor interaction. We developed a strategy that combined (i) directed covalent coupling of cytokines, (ii) quantification of coupling efficiency through fluorescence detection, and (iii) a reliable protease cleavage assay to control orientation of coupling. For this purpose, fusion proteins of the SNAP-tag followed by an enterokinase recognition site, yellow fluorescent protein (YFP), and the cytokine of interest being either interleukin-6 (IL-6) or oncostatin M (OSM) were generated. The SNAP-tag is a derivative of O(6)-alkylguanine-DNA alkyltransferase that couples itself covalently to benzylguanine. Bioactivities of the SNAP-YFP-cytokines were shown to be comparable with the nontagged cytokines. Efficient coupling of SNAP-YFP-cytokines to benzylguanine-modified beads was demonstrated by flow cytometry. The fact that enterokinase treatment released most of the fluorescence from the beads is indicative for directed coupling and only marginal adsorptive binding. Cellular responses to SNAP-YFP-cytokine beads were analyzed in cellular lysates and by confocal microscopy indicating that the directionally immobilized cytokines are fully signaling competent with respect to the activation of ERK and STAT3. The strategy presented here is generally applicable for the directed covalent immobilization of fluorescently labeled proteins including the convenient and reliable control of coupling efficiency and orientation.

Controlling pH in shake flasks using polymer-based controlled-release discs with pre-determined release kinetics.

BACKGROUND: There are significant differences in the culture conditions between small-scale screenings and large-scale fermentation processes. Production processes are usually conducted in fed-batch cultivation mode with active pH-monitoring and control. In contrast, screening experiments in shake flasks are usually conducted in batch mode without active pH-control, but with high buffer concentrations to prevent excessive pH-drifts. These differences make it difficult to compare results from screening experiments and laboratory and technical scale cultivations and, thus, complicate rational process development. In particular, the pH-value plays an important role in fermentation processes due to the narrow physiological or optimal pH-range of microorganisms. To reduce the differences between the scales and to establish a pH-control in shake flasks, a newly developed easy to use polymer-based controlled-release system is presented in this paper. This system consists of bio-compatible silicone discs embedding the alkaline reagent Na2CO3. Since the sodium carbonate is gradually released from the discs in pre-determined kinetics, it will ultimately compensate the decrease in pH caused by the biological activity of microorganisms. RESULTS: The controlled-release discs presented here were successfully used to cultivate E. coli K12 and E. coli BL21 pRSET eYFP-IL6 in mineral media with glucose and glycerol as carbon (C) sources, respectively. With glucose as the C-source it was possible to reduce the required buffer concentration in shake flask cultures by 50%. Moreover, with glycerol as the C-source, no buffer was needed at all. CONCLUSIONS: These novel polymer-based controlled-release discs allowed buffer concentrations in shake flask media to be substantially reduced or omitted, while the pH remains in the physiological range of the microorganisms during the whole cultivation time. Therefore, the controlled-release discs allow a better control of the pH, than merely using high buffer concentrations. The conditions applied here, i.e. with significantly reduced buffer concentrations, enhance the comparability of the culture conditions used in screening experiments and large-scale fermentation processes.

Functionalization of electrospun poly(ε-caprolactone) fibers with the extracellular matrix-derived peptide GRGDS improves guidance of schwann cell migration and axonal growth.

The best available treatment of peripheral nerve lesions involves transplantation of an autologous nerve. This approach, however, entails sensory deficits at the donor site and requires additional surgery. Such limitations have motivated the search for a bioengineering solution to design artificial implants. For this purpose we are producing orientated biodegradable microfibers of poly(ε-caprolactone) (PCL) with electrospinning. The present study describes the functionalization of these electrospun fibers with biologically active peptides to produce guidance structures for Schwann cell migration and axonal regeneration. For the chemical modification PCL was blended with star-shaped NCO-poly(ethylene glycol)-stat-poly(propylene glycol) (PCL/sPEG) as a covalent linker for the peptide GRGDS, derived from extracellular matrix proteins. To test biological functions of electrospun fibers, Schwann cell migration and axonal growth from dorsal root ganglia explants were investigated with time lapse video microscopy. Migrating Schwann cells as well as growing sensory axons closely followed the electrospun fibers with occasional leaps between adjacent fibers. Cell migration was characterized by frequent changes in velocity and direction reversals. Comparison of substrates showed that functionalized fibers caused more Schwann cells to move out of the explants, supported faster cell migration and axonal growth than the nonfunctional fibers. Using inhibitors of intracellular signaling kinases, we found that these biological effects required activation of the phosphatidyl inositol-3-kinase pathway. Since sPEG-containing fibers also showed low levels of nonspecific protein adsorption, which is desirable in the context of artificial implant design, the peptide modification of fibers appears to provide good substrates for nerve repair.

Intracardiac injection of matrigel induces stem cell recruitment and improves cardiac functions in a rat myocardial infarction model.

Matrigel promotes angiogenesis in the myocardium from ischemic injury and prevents remodelling of the left ventricle. We assessed the therapeutic efficacy of intracardiac matrigel injection and matrigel-mediated stem cell homing in a rat myocardial infarction (MI) model. Following MI, matrigel (250 µl) or phosphate-buffered solution (PBS) was delivered by intracardiac injection. Compared to the MI control group (MI-PBS), matrigel significantly improved left ventricular function (n= 11, P < 0.05) assessed by pressure-volume loops after 4 weeks. There is no significant difference in infarct size between MI-matrigel (MI-M; 21.48 ± 1.49%, n = 10) and MI-PBS hearts (20.98 ± 1.25%, n = 10). The infarct wall thickness of left ventricle is significantly higher (P < 0.01) in MI-M (0.72 ± 0.02 mm, n = 10) compared with MI-PBS (0.62 ± 0.02 mm, n = 10). MI-M hearts exhibited higher capillary density (border 130.8 ± 4.7 versus 115.4 ± 6.0, P < 0.05; vessels per high-power field [HPF; 400×], n = 6) than MI-PBS hearts. c-Kit(+) stem cells (38.3 ± 5.3 versus 25.7 ± 1.5 c-Kit(+) cells per HPF [630×], n = 5, P < 0.05) and CD34(+) cells (13.0 ± 1.51 versus 5.6 ± 0.68 CD34(+) cells per HPF [630×], n = 5, P < 0.01) were significantly more numerous in MI-M than in MI-PBS in the infarcted hearts (n = 5, P < 0.05). Intracardiac matrigel injection restores myocardial functions following MI, which may attribute to the improved recruitment of CD34(+) and c-Kit(+) stem cells.

Electrospun, biofunctionalized fibers as tailored in vitro substrates for keratinocyte cell culture.

Cell adhesion preventing fiber surfaces were tailored differently with bioactive peptides (a fibronectin fragment (GRGDS), a collagen IV fragment (GEFYFDLRLKGDK) and a combination of both) to provide an artificial extracellular matrix as a substrate for HaCaT keratinocyte cell culture. Therefore, a polymer blend containing a six-arm star-shaped statistical copolymer of ethylene oxide and propylene oxide in the ratio 80:20 (NCO-sP[EO-co-PO]) and poly-[D,L-(lactide-co-glycolide)] (PLGA) was electrospun. The resulting fibers were biofunctionalized and investigated as in vitro substrates using the HaCaT kerationcyte cell line. Appropriate surface chemistry on these electrospun fibers proved to prevent adhesion of keratinocytes, while additional immobilization of certain peptide sequences induced cell adhesion. These specific fibers enable investigation of immobilized active molecules and the subsequent cellular response to the scaffold. HaCaT keratinocytes were found to selectively adhere to those fibers modified with either collagen IV segment GEFYFDLRLKGDK or a mixture of the two peptide sequences GEFYFDLRLKGDK and GRGDS (1:1). However, the synergistic effects of both (the fibronectin fragment and the collagen IV fragment) seem to significantly increase the numbers of adherent keratinocytes.

Solvent-free functionalization of silicone rubber and efficacy of PAAm brushes grafted from an amino-PPX layer against bacterial adhesion.

Silicone rubber is a frequently employed biomaterial that is prone to bacterial adhesion and biofilm formation. In this study, the surface of silicone rubber was solvent-free functionalized by chemical vapor deposition (CVD) of poly(o-amino-p-xylylene-co-p-xylylene (amino-PPX). Subsequently, the amino groups of the amino-PPX layer were used to introduce the initiator from a vapor phase for atom transfer radical polymerization of acrylamide to form polyacrylamide (PAAm) brushes. The modification steps were verified by means of X-ray photoelectron spectroscopy and attenuated total reflection-Fourier transform infrared spectroscopy. Adhesion of Staphylococcus aureus ATCC 12600 and Escherichia coli 3.14 to an amino-PPX-PAAm brush coating in a parallel plate flow chamber was strongly reduced with respect to non-coated silicone rubber - by 93% and 99%, respectively. For E. coli 3.14, this reduction is larger than that obtained for solvent functionalization of γ-aminopropyltriethoxysilane-PAAm brushes due to the higher density of amino groups introduced by the CVD of amino-PPX.

Bioresorbable electrospun fibers for immobilization of thiol-containing compounds.

For the reconstruction of functional tissue, biodegradable scaffolds providing specific surface functionality and a three-dimensional structure matching that of the damaged tissue are needed. Fibers capable of controlling cell-fiber interaction were produced by electrospinning of PDLLA-block-PEG with thiol-reactive end groups from a solvent mixture. The hydrophilic fibers uniquely combine minimized non-specific protein adsorption and well-defined surface reactivity allowing controlled immobilization of peptides and proteins. Human dermal fibroblasts show adherence and proliferation on the surface of RGDC-functionalized electrospun PDLLA-block-PEG fibers.

Functionalization of electrospun fibers of poly(epsilon-caprolactone) with star shaped NCO-poly(ethylene glycol)-stat-poly(propylene glycol) for neuronal cell guidance.

Microfibers produced with electrospinning have recently been used in tissue engineering. In the development of artificial implants for nerve regeneration they are of particular interest as guidance structures for cell migration and axonal growth. Using electrospinning we produced parallel-orientated biocompatible fibers in the submicron range consisting of poly(epsilon-caprolactone) (PCL) and star shaped NCO-poly(ethylene glycol)-stat-poly(propylene glycol) (sPEG). Addition of the bioactive peptide sequence glycine-arginine-glycine-aspartate-serine (GRGDS) or the extracellular matrix protein fibronectin to the electrospinning solution resulted in functionalized fibers. Surface characteristics and biological properties of functionalized and non-functionalised fibers were investigated. Polymer solutions and electrospinning process parameters were varied to obtain high quality orientated fibers. A polymer mixture containing high molecular weight PCL, PCL-diol, and sPEG permitted a chemical reaction between hydroxyl groups of the diol and isocyanante groups of the sPEG. Surface analysis demonstrated that sPEG at the fiber surface minimized protein adhesion. In vitro experiments using dorsal root ganglia explants showed that the cell repellent property of pure PCL/sPEG fibers was overcome by functionalization either with GRGDS peptide or fibronectin. In this way cell migration and axonal outgrowth along fibers were significantly increased. Thus, functionalized electrospun PCL/sPEG fibers, while preventing non-specific protein adsorption, are a suitable substrate for biological and medical applications.

Influence of particle size and material properties on mucociliary clearance from the airways.

Mucociliary clearance (MC), designed by evolution to eliminate inhaled and possibly noxious material from the airways, considerably limits the benefit of inhalation therapy. Although the principles of MC seem to be understood, there are still many open questions on mucociliary particle clearance. In this study a trachea-based in vitro model was used to investigate the effect of particle size, zeta-potential, and mucoadhesive particle properties on mucociliary particle clearance. As different sized particles (50-6000 nm) were tested at equal mass concentrations, size related factors, namely particle number and particle surface area, varied by several orders of magnitude between the experiments. Surprisingly, particle clearance for 50 nm up to 6000 nm-sized polystyrene particles did not differ significantly (p < 0.05): 50 nm (2.9 +/- 0.6 mm/min); 100 nm (3.8 +/- 0.9 mm/min); 1000 nm (3.8 +/- 0.8 mm/min); 6000 nm (3.2 +/- 0.6 mm/min). In clear contrast, particles prepared from different PLGA-based copolymers (polylactic-co-glycolic acid) showed a significant effect on particle transport. PEG-PLGA particles (polyethylene glycol) showed the fastest and normal transport rates (5.9 +/- 1.7 mm/min) compared to the ICRP's (International Commission of Radiological Protection) standard value for average tracheal transport rates (5.5 mm/min). Mucoadhesive chitosan-PLGA particles were transported at the slowest rate (0.7 +/- 0.3 mm/min) of all particles tested. Overall, particle size and zeta-potential seem to be relatively uncritical, whereas material properties and the related particle surface chemistry significantly influence mucociliary particle clearance. Considering these findings in future drug formulation seems to be a promising strategy to improve inhalation therapy by prolonged particle/drug residence time within the airways.

High-throughput screening of Hansenula polymorpha clones in the batch compared with the controlled-release fed-batch mode on a small scale.

Most large-scale production processes in biotechnology are performed in fed-batch operational mode. In contrast, the screenings for microbial production strains are run in batch mode, which results in the microorganisms being subjected to different physiological conditions. This significantly affects strain selection. To demonstrate differences in ranking during strain selection depending on the operational mode, screenings were performed in batch and fed-batch modes. Two model populations of the methylotrophic yeast Hansenula polymorpha RB11 with vector pC10-FMD (P(FMD)-GFP) (220 clones) and vector pC10-MOX (P(MOX)-GFP) (224 clones) were applied. For fed-batch cultivations in deep-well microtiter plates, a controlled-release system made of silicone elastomer discs containing glucose was used. Three experimental set-ups were investigated: batch cultivation with (1) glucose as a substrate, which catabolite represses product formation, and (2) glycerol as a carbon source, which is partially repressing, respectively, and (3) fed-batch cultivation with glucose as a limiting substrate using the controlled-release system. These three experimental set-ups showed significant variations in green fluorescent protein (GFP) yield. Interestingly, screenings in fed-batch mode with glucose as a substrate resulted in the selection of yeast strains different from those cultivated in batch mode with glycerol or glucose. Ultimately, fed-batch screening is considerably better than screening in batch mode for fed-batch production processes with glucose as a carbon source.

Bio-functionalized star PEG-coated PVDF surfaces for cytocompatibility-improved implant components.

Unmodified and GRGDS peptide-modified six arm PEG star based hydrogels (Star PEG) have been applied as a multifunctional, easy to handle coating system for textile polyvinylidene fluoride (PVDF) structures, which prevent unspecific protein and cell adsorption and control-specific cell adhesion. The reactive isocyanate-terminated Star PEG has been successfully applied to ammonia-plasma treated two- and three-dimensional PVDF surfaces. Easy modification of the surface hydrogel by mixing in of GRGDS peptide during the coating step or subsequent coupling of GRGDS was determined by TOF-SIMS. Unmodified and GRGDS-functionalized hydrogel surfaces show distinct protein repellency, as demonstrated by fluorescence microscopy after incubation with fluorescent labeled proteins and Surface MALDI-TOF-Mass Spectroscopy. Cell culture experiments with primary human dermal fibroblasts, primary fetal rat fibroblasts, and human osteoblasts on GRGDS and/or KRSR Star PEG-modified two- and three-dimensional substrates show advancement in cell adhesion and proliferation compared with untreated PVDF surfaces, whereas pure star PEG-coated surfaces show no cell adhesion. The combination of protein and cell repellent properties with specific biofunctionality and easy application of the coatings will enable their application for 3D-scaffolds.